User's Manual

user-submitted data reported to RadioReference, and also to the system configuration
changes that a radio system operator may make from time to time. Field-testing the Library
data for accuracy is not feasible.
For detailed radio system information worldwide, be sure to visit
http://www.radioreference.com frequently. We encourage you to get involved with
RadioReference, and submit your own new or updated data to the database, which will
result in future updated editions of the Library!
RadioShack and RadioReference are not responsible for errors, omissions or outdated
Library data.
Getting Started
Unpacking iSCAN
Unpack your iSCAN carefully. Save all documentation and packing materials in case it is
necessary to return your scanner for repair.
WARNING: Always protect iSCAN from exposure to extreme heat or cold temperatures.
WARNING: iSCAN is not waterproof. Do not expose it to rain, extreme high humidity or
moisture.
Inserting the batteries
Remove the door covering the battery compartment by pressing gently where the door is
marked OPEN and sliding the door downwards until it stops, approximately 1/4”. Lift the
door away from the radio.
Set the battery type selector switch to ALKA for non-rechargeable alkaline batteries or
NI-MH for rechargeable NiMH batteries. Insert two AA batteries, taking care to ensure that
the batteries are inserted according to the polarity diagram shown inside of the battery
compartment. Replace the battery compartment door by placing it back over the batteries
and sliding it upward gently until it locks in place.