User's Manual

To power the scanner using an AC USB power adaptor, connect the USB plug end of the
supplied USB power/data cable to the AC USB power adapter, and connect the scanner
data plug end of the supplied USB power/data cable to the scanner’s PC/IF - PWR jack. To
prevent corruption of SD Card data, always power iSCAN off using the front panel POWER
button before connecting or disconnecting external power sources.
NOTE: Some external USB power supplies may generate RF noise that can interfere with
iSCAN’s reception.
Using Vehicle Battery Power
You can power the scanner using an optional car USB power adaptor (RadioShack Online
Catalog Number 55026592) and the supplied USB power/data cable.
To power the scanner using a car USB power adaptor, connect the USB plug end of the
supplied USB power/data cable to the car USB power adapter, and connect the scanner
data plug end of the supplied USB power/data cable to the scanner’s PC/IF - PWR jack. To
prevent corruption of SD Card data, always power iSCAN off using the front panel POWER
button before connecting or disconnecting external power sources.
NOTE: If you use a cigarette-lighter USB power cable and your vehicle’s engine is running,
you might hear electrical noise from the engine while scanning. This is normal. Some
external USB power supplies may generate RF noise that can interfere with iSCAN’s
reception.
Browsing the Library, Picking Objects and Importing to Playlists
Overview
Programming iSCAN consists of three basic steps, and you’ll follow these steps each time
you want to transfer new objects from the Library to iSCAN’s Playlists. The three steps are
as follows:
Browse the Library