User's Manual

how iSCAN and its Playlists work, you can decide what strategies you want to use for
grouping objects into Playlists. You may wish to group your objects into Playlists according
to the type of use, for example, Police, Fire, Racing, etc. Or, you may wish to group objects
by into Playlists according to geographical area.
To import your picked objects into one or more Playlists, press the MENU key while
browsing the Library to access the Library’s special menu. Scroll to Import Selected and
press the ▶/II/SEL key. iSCAN will display a list of Playlists. Use the   and ▶/II/SEL
keys to place checkmarks next to each Playlist that you wish to import the selected objects
into. After you have marked each desired destination Playlist, press the  key to begin
importing your picked objects into the selected Playlists. iSCAN will begin the importing
process, which may take several minutes depending on the number of objects you have
picked.
HINT: You can change the names of the Playlists using the “Playlists” option under the
Main Menu, or with the iSCAN PC Application.
Setting Up Playlists
Once you have imported some objects into iSCAN’s Playlists, you are almost ready to
begin monitoring. Before you use iSCAN to monitor your imported objects, you’ll want to
enable the Playlists where your objects are stored, and you will also want to give your
Playlists names that describe the objects that you have stored in them.
Enabling/Disabling Playlists
To enable and disable Playlists for scanning, press the MENU key until you reach the Main
Menu, which is indicated at the top of the LCD display. Use the  and  keys to scroll to
Playlists, then press the  key to proceed to the list of Playlists. Each Playlist is preceded
with a checkbox. To enable a Playlist for scanning, press the ▶/II/SEL key to add a
checkmark to the selected Playlist. To disable a Playlist for scanning, press ▶/II/SEL again
to remove the checkmark.
Renaming Playlists