User's Manual

Giving your Playlists descriptive names makes programming and using iSCAN much easier.
To name a Playlist, navigate to the Playlists menu as described above, and press the 
key to edit the name. Follow the on-screen instructions to change the Playlist name.
Monitoring Imported Objects
Browsing Playlists and Objects
You can easily browse the objects and Playlists you have created in iSCAN. Press the
MENU key until the Main Menu is displayed. Scroll to the Browse Objects menu item and
press the  key. Use the   keys to scroll through the Playlists, and use the   keys
to review the objects in each Playlist.
Playing Objects
iSCAN allows you to “play” the objects that you have stored in Playlists. You can play a
single object, or, you can play all of the objects that you have stored in enabled Playlists.
You can also pause iSCAN on a single object while it is scanning.
Playing While Browsing
You can play objects while browsing objects and Playlists. Follow the steps for Browsing
Playlists and Objects above. Press the ▶/II/SEL key to play a selected object. Press the
▶/II/SEL key again to scan all objects in enabled Playlists.
Scanning
To scan all active objects in enabled Playlists, press the MENU key to display the Main
Menu. Use the  and  keys to scroll to Play, then press the  or ▶/II/SEL key to begin
playing. To enable or disable playlists, follow the instructions in the Enable/Disable Playlists
section above.
Pausing
To pause iSCAN on an active object, press the ▶/II/SEL key while iSCAN is stopped on the