User's Manual

This combination creates an interesting “strobe light” effect similar to the emergency lights
on a public safety vehicle.
Many more combinations are possible - just experiment to find the ones that work for you.
To set the Flash Pattern, use the  and  keys to scroll to Flash Pattern, then press the 
key to set the pattern value. Follow the on-screen instructions to set the value of the flash
pattern, using Figure 6 above as your guide.
To set On Time and Off Time, use the  and  keys to scroll to On Time or Off Time, then
press the  key to set the value. Follow the on-screen instructions to set the value for On
Time and Off Time.
Delete Object
Selecting Delete Object removes the object from iSCAN’s working memory configuration.
The Library data is never altered in any way, so if necessary, the object can be imported to
iSCAN’s Playlists again.
To delete the current object, use the  and  keys to scroll to Delete Object, then press
the  key to proceed with the deletion. Follow the on-screen instructions to confirm Delete
Object.
Weather Modes
iSCAN is also a sophisticated and powerful NOAA weather radio receiver. You can monitor
24 hour NOAA weather radio broadcasts anytime, and, you can use iSCAN as a weather
priority receiver while scanning to alert you to severe weather broadcasts as they occur, or
you can activate Dedicated SAME Weather Alert Receiver mode, where your iSCAN
remains quiet until a warning for the specific geographic area(s) you define is received.
NOTE: Your scanner incorporates weather alert as one of its features and is an extremely
sensitive high quality receiver on the weather frequencies. However, the included flex
antenna is optimized for general purpose scanning. If you use this scanner as your only
means for receiving weather alerts, please check to be sure you are receiving a clear
signal on the flex antenna or switch to an external antenna that gives you clear reception of