User's Manual

20-444 User’s Guide Draft

2. Press number key (1 to 0).

Your favorite driver (or channel) enters favorite number.

If you press 1-digit number key, your scanner watches your desired favorite channel. Press and

hold FAV about 1 second to scan the favorite channel memory. If the scanner find transmission,

scan stops and monitor the favorite transmission. If the transmission ends, the scanner

continues the scan.

Using EDIT key

If you press EDIT, the scanner displays following menu:

FREQUENCY

PAGE TAG

FAV

Setting

PC/IF

CLONE

Select with rotary selector then press ENT to proceed to next sub-menu or editing display. Press

EDIT to back to the previous menu/operation.

Frequency Edit

You select FREQUENCY then press ENT, the scanner enters pre-programmed data edit mode.

Sub-Menu (CAR# and MRN) appears.

1. Select 1 or 2, or move the cursor to 1:CAR# or 2:MRN using rotary selector, then press ENT.

2. Select number, or move the cursor to desired point using rotary selector, then press ENT.

Edit? 1:YES 2:NO appears on the top line.

Note: If you select NEW to new frequency stores into CAR number or MRN channel. And

Page