User Manual

20-428 Owner’s Manual
Page 30 of 50
4. Press PROG to enter the program mode. M changes to P.
5. Press FUNC.
6. Press CLEAR. The frequency number changes and 0.0000 appears.
deleting all frequencies in a channel bank
1. Press PROG.
2. Press FUNC then the bank number you want to clear. Bank X selected. Fn+CLR to delete all
frequencies. TEXT to edit tag appears.
3. Press FUNC then CLEAR. Clear entire bank? Press 1 to clear all, any other key aborts appears.
4. Press 1 to clear the selected bank’s all channel memory. please stand by. appears while the
scanner clears all channel memory. Press any other than 1 to cancel clear.
using delay
Many conversations might have a pause of several seconds between a query and a reply. To avoid
missing a reply, you can program a 2-second delay into any of your scanner’s channels. Then, when
the scanner stops on the channel, DLY appears and the scanner continues to monitor the channel
for 2 seconds after the transmission stops before it resumes scanning. The delay feature is also
available while searching.
Note: Delay is automatically set as the default for each channel when you turn on the scanner.
To turn delay on or off, press •/DELAY. DLY (delay on) or dly (delay off) appears on the display.
locking out channels or frequencies
You can scan existing channels or search frequencies faster by locking out channels or frequencies
that have a continuous transmission, such as a weather channel.
locking out channels
To lock out a channel while scanning, press L/OUT when the scanner stops on the channel. To lock
out a channel manually, select the channel then press L/OUT so lo changes to LO on the display.
Note: You can still manually select locked-out channels.
To remove the lockout from a channel, manually select the channel and press L/OUT so LO changes