User Manual

20-428 Owner’s Manual
Page 44 of 50
1. Press PROG then TRUNK.
2. Press FUNC. Then L/OUT. The locked out ID appears. If the ID memory bank has no locked-out
ID, you hear the low beep tone.
clearing talk group IDs
1. Press PROG then TRUNK.
2. Press FUNC, /¥ or ¥/ to select ID memory.
3. Press FUNC then CLEAR.
clearing all talk group IDs in a single bank
You can clear all talk group IDs within a bank. This lets you quickly delete all talk group IDs from a
bank if you want to use the bank to store different data (such as a new set of talk group IDs).
1. Press PROG.
2. Press TRUNK to enter a talk group ID memory mode.
3. Select a talk group ID bank using FUNC, /¥ or ¥/.
4. Press FUNC then 6. Clear entire list? Press 1 to clear all, any other key aborts appears.
5. Press 1 to clear all talk group IDs within a bank. List cleared. appears.
To cancel the deletion, press any key except 1. The scanner returns to the talk group ID memory
mode.
changing the open/closed mode
1. Press MAN.
2. Press FUNC then /¥ or ¥/ to select the channel storage bank.
3. Press FUNC then •/DELAY. Bank OPEN. or Bank CLOSED. appears. After that message
disappears, the fifteenth digit on the second line of the display changes from + to – or vice versa.
4. Repeat Steps 2 and 3 for each bank.