User's Manual

20-496 Owner’s Manual Draft Page 43/78
Reviewing Locked-Out Search Frequencies
To review the frequencies within a search bank that you locked out:
1. Press SRCH to set search mode, and select the desired search bank to review its locked out
frequencies.
2. Press FUNC and then L/OUT. The last locked-out frequency and Lockout list appear. Press ^ or v to
scroll through the list. The locked-out number and the total locked-out number also appears as L/O XX of
YY. (The tenth of twenty five locked out frequencies would appear as L/O 10 of 25). If the search bank has
no locked-out frequencies, Empty. Lockout list appears in the scanner’s display. Press SRCH to cancel
reviewing locked-out frequencies.
Clearing a Locked-Out Search Frequency
To clear a locked-out frequency, select that frequency (see “Reviewing the Lock-Out Channels” on Page
XX), and then press CLEAR.
If all locked-out frequencies are cleared within a channel storage bank, Empty. Lockout list appears in the
scanner’s display.
Clearing All Locked-Out Frequencies in a Search Bank
1. Press SRCH.
2. Select the search bank in which you want to clear all locked-out frequencies.
3. Press FUNC and then press L/OUT. Lockout list appears in the scanner’s display.
4. Press FUNC and then 6. The scanner will display Confirm list clear? 1=YES Press other key for NO.
Press 1 to clear all locked-out frequencies. List cleared appears for about 2 seconds. Press any key other
than 1 to cancel clear.
CHANGING THE RECEIVE MODE
The scanner defaults to the commonly used AM or FM/Digital receive mode for each frequency range. The
preset mode is correct in most cases. However, some amateur radio transmissions and trunked systems
do not operate in the preset mode. If you try to listen to a transmission when the scanner is not set to the
correct receive mode, the transmission might sound weak or distorted.
To change the receive mode, repeatedly press MODE. The receive mode changes as follows:
AM – configures the channel for AM mode.