User's Manual

20-496 Owner’s Manual Draft Page 47/78
1. Press PROG
2. Press FUNC, PROG. The scanner will display the V-Scanner menu:
LCD illustration (same as 20-526)
Select the option that corresponds with the function that you wish to execute.
3. If you want to save the contents of the scanner’s working memory to a V-Scanner folder, press 1. The
scanner will display:
LCD illustration (same as 20-526)
Press the number key that corresponds with the V-Scanner folder you wish to save the current
configuration to, or press CLEAR to return to the V-Scanner menu. Your selected folder location and the
name of any previously stored V-Scanner will appear in the display. For example, assume you are saving to
V-Scanner folder 1, and have previously stored a V-Scanner configuration with the name “My V-Scanner” in
that location. If you choose V-Scanner Folder 1, the scanner will display:
LCD illustration (same as 20-526)
Press ENT to accept the choice, another number key to change your selection, or CLEAR to abort and
return to the V-Scanner menu. The scanner gives you one final opportunity to abort before proceeding:
LCD illustration (same as 20-526)
Press ENT to confirm your choice and proceed with the V-Scanner save operation.
While saving, the scanner will display:
LCD illustration (same as 20-526)
The contents of the selected V-Scanner folder will be replaced with your current working memory data.
4. To load the contents of a V-Scanner folder to the scanner’s working memory, press 2. The scanner will
display:
LCD illustration (same as 20-526)
Press the number key that corresponds with the V-Scanner folder you wish to load into the scanner’s
working memory, or press CLEAR to return to the V-Scanner menu. If you select a V-Scanner folder, the
scanner will prompt you to verify your choice. For example, if you choose V-Scanner Folder 1, the scanner