User's Manual

20-496 Owner’s Manual Draft Page 73/78
PROG If scanning or monitoring a trunked call, stops scan operation, activates
Program Mode. If monitoring conventional call, stops scan operation,
activates Program Mode, holds on active channel.
WX Activates Weather Mode
TRUNK If monitoring a trunking talkgroup, stores the ID into the next available
ID list memory location.
TRUNK (hold) If monitoring a trunking talkgroup, activates ID Hold Mode, scanner holds
on the active talkgroup.
PRI Toggles priority.
TUNE Enters Tune Mode.
ATT Toggles attenuation for active channel, or, if global attenuation is set, toggles global
attenuation on or off.
TEXT If monitoring a trunking talkgroup, toggles talkgroup alphanumeric text tag
or trunking ID display.
L/OUT If monitoring a trunking talkgroup, locks out the active talkgroup so it will not
be monitored. If monitoring a conventional channel, locks out the active channel
so it will not be monitored.
MODE If monitoring a conventional channel, cycles through the valid modes, clears
any stored CT or DC code.
SRCH Activates Search Mode.
NUMBER Toggle scan banks on or off.
KEYS 0-9
DECIMAL When monitoring a conventional channel,
POINT toggles delay for that channel on or off.
PAUSE If the scanner stops scanning, the scanner activates manual mode.
ENT When monitoring a conventional channel that is programmed for CT or DC
Search Mode, stores a detected CT or DC code with the channel memory.
^ or v Changes scan direction, up or down.
FUNC + MAN Toggles digital AGC
FUNC + When monitoring a talkgroup call, toggles display of control channel text tag or
TRUNK Trunked ID sub-bank status.
FUNC + PRI If monitoring a conventional channel, stores the frequency into the priority channel.
FUNC + If monitoring a conventional channel, stores the frequency into the tune memory.
TUNE
FUNC + ATT Toggles attenuator mode, normal or global.
FUNC + 5 Toggles open or closed mode for current bank.
FUNC + 0-4 When Trunked ID sub-bank display is active, and while monitoring a talkgroup
call, toggles ID sub banks 0-4 on or off.
Manual Mode
Keystrokes Function
SCAN Activates Scan Mode.