User's Manual

20-496 Owner’s Manual Draft Page 77/78
Keystrokes Function
SCAN Activates Scan Mode.
MAN Activates Manual Mode.
PROG Activates Program Mode.
WX Activates Weather Mode.
PRI Toggles priority.
ATT Toggles attenuation for active search range, or, if global attenuation is set,
toggles global attenuation on or off.
PAUSE Pauses and resumes tune operations.
MODE Cycles through AM/FM/CT/DC modes.
SRCH Activates Search Mode
DECIMAL POINT Toggle delay on or off.
^ or v Changes tune direction, resumes tune operation after stopping on an active
frequency.
FUNC + MAN Toggles digital AGC.
FUNC + PRI Stores active tune frequency in priority memory.
FUNC + ATT Toggles attenuator mode, normal or global.
FUNC + MODE Sets mode to default for active tune range.
FUNC + PROG Stores active tune frequency in desired bank and channel (e.g., “123 + ENT”
stores the active frequency in Bank 1, Channel 23).
FUNC + ENT Stores active tune frequency in next available channel in desired bank
(e.g., “1 + ENT” stores active frequency in next empty channel in Bank 1).
ID List Edit
Keystrokes Function
SCAN Activates Scan Mode.
MAN Activates Manual Mode.
PROG Activates Program Mode.
WX Activates Weather Mode.
TEXT Edits text tag for selected ID.
TRUNK Steps to first ID in next ID sub bank.
TUNE Enters Tune Mode.
L/OUT Toggles lockout on the selected ID.
MODE Cycles trunking mode through MO, ED and “not trunked”.
SRCH Activates Search Mode.
<id> ENT Stores ID into selected location.
^ or v ^ steps to the next ID, v steps to the previous ID, hold down to scroll.
FUNC + Selects ID delay duration for selected bank.
DECIMAL POINT
FUNC CLEAR Clears all programming data in selected ID.
FUNC + 1 Toggles active sub bank on or off.