User's Manual

3. Press channel number then press ENT to select the channel you desired.

4. Press 2 to enter the Program Text.

5. Enter the text using number keys. (see "Text Input Chart").

Note: If you make a mistake, press < or > to move to the character you want to change.

For example, to identify amateur (ham) radio transmissions in the 6 meter range, input "HAM 6m" as follows:

. "H" is the second letter associated with 4 on the keypad. Press 4 then 2.

. "A" is the first letter associated with 2 on the keypad. Press 2 then 1.

."M" is the first letter associated with 6 on the keypad. Press 6 then 1.

. "Space" Press ./CLEAR.

. "6" is the sixth number associated with 1 on the keypad. Press 1 then 6.

. "m" is the first letter associated with 6 on the keypad. Press 6 and FUNC (for the lower case set), then press

5. Press ENT to input the text.

Text Input Chart

Press Character Press Character

./CLEAR Space 1 1 2 3 4 5 6 7 8 9 0

2 A B C 2 FUNC a b c

3 D E F 3 FUNC d e f

4 G H I 4 FUNC g h i

5 J K L 5 FUNC j k l

6 M N O 6 FUNC m n o

7 P Q R S 7 FUNC p q r s

8 T U V 8 FUNC t u v

9 W X Y Z 9 FUNC w x y z

SCANNING CHANNELS

To begin scanning channels or to start scanning again after monitoring a specific channel, press SCAN.

Notes:

. You must store frequencies into channels before the scanner can scan them. The scanner does not scan

through empty channels.