User's Manual

SR4 Aircraft
SR5 Ham
SR6 Limit Search (User configurable)
Follow these steps to select preprogrammed search bands and search them for active frequencies.
1. Repeatedly press SRCH to select your desired search bank (SR0, SR1, SR2, SR3, SR4, SR5, or SR6).
2. In the marine and FRS/GMRS/MURS bands, you can directly select a channel or search through the band.
When M appears at the left most position of the second line, you can directly select a channel (refer to
"Search Band Charts" on Page XX). Use the numeric keypad to select a specific two digit channel number
(for example, press 16 to select Channel 16, or 05 to select channel 5). You can also change the channels by
pressing ^ or v.
There are several group banks in SR0 Car Band, SR3 Police/Fire and SR5 ham bands. You can turn on the
groups by pressing the group numbers. For example, to turn off group 2, press 2.
3. In marine and FRS/GMS/MURS bands, press FUNC, and then SRCH while M is displayed. M changes to
S and now you can search through the band. Press FUNC, and then SRCH again to return to the previous
mode.
In all search bands except marine and FRS/GMS/MURS bands, press FUNC and then SRCH to pause the
search. To continue search, press FUNC then press SRCH again.
4. Rotate SQUELCH clockwise and leave it set to a point just after the rushing sound stops. After 2 seconds
(if the delay feature is on), the received frequency appears and the scanner starts searching.
5. When the scanner finds an active frequency, it stops searching, and resumes when the transmission ends.
If delay is programmed with the search range the scanner will pause for a reply before search resumes.
Notes:
. In the aircraft and limit search bands, press FUNC the press ^ to start searching up form the lowest
frequency or press v to start searching down from the highest frequency.
. You can press ^ or v at any time to change the search direction.
. Use ^ or v while paused to increment the frequency one step at a time.
Search Band Charts
Search bank: SR0 Car number band
Group Frequency (MHz) Step (kHz)