User's Manual

3 465.0125-465.6375 12.5
4 856.2125-860.9875 25
4 866.0125-868.9875 12.5
Search bank: SR4 Aircraft band
Frequency (MHz) Step (kHz)
108.0000-136.9875 12.5
Search bank: SR5 Ham band
Group Frequency (MHz) Step (kHz)
1 29.0000-29.7000 5
2 50.0000-54.0000 5
3 144.0000-148.0000 5
4 420.0000-450.0000 12.5
Search bank: SR6 Programmable limit search band
Searching Active Frequencies in Your Desired Frequency Range
You can search a specific range of frequencies by programming SR6 with lower and upper frequency limits.
1.Press and hold FUNC for about 2 seconds, Function menu appears on the display.
2. Press 4 to select Program Search Data, then press 1 to select Change Frequency. The cursor blinks L on
the top line for the lower limit frequency.
3. Use the number keys and ./CLEAR to enter the desired lower limit frequency (including the decimal point).
4. Press ENT to set the lower limit frequency. The cursor moves to upper frequency field. If the entered
frequency is incorrect, Invalid Freq. briefly appears in the scanner's display.
5. Enter your desired upper frequency and press ENT.
6. Press SRCH to start searching. When the scanner finds an active frequency, it stops searching.
USING ZEROMATIC
You can set Zeromatic on or off by pressing FUNC then 9 (Z). Press FUNC, and then 9 again to toggle the