User's Manual
Zeromatic setting. When this feature is turned on, Zeromatic ON briefly appears in the display, then z appears
at the first digit of the second line. When searching with Zeromatic on, the scanner will automatically tune to
the correct center frequency (or the step increment closest to the correct center frequency). When searching
or tuning with Zeromatic off, the scanner will unmute faster on a detected signal but the frequency may not be
exact. If the scanner stops on a signal before it reaches the correct center frequency, you can step up or
down to the correct frequency using the ^ or v keys. Zeromatic functions only in search banks 0, 3, 4, 5, 6,
and manually tuning.
MANUALLY TUNING A FREQUENCY
You can manually set the scanner to move through all receivable frequencies, or select a specific frequency
as a starting point.
1. Press MAN. MAN appears.
2. Press FUNC then press ^ or v. TUNE, the current frequency appear in the display.
3. Use the number keys to enter the frequency where you want the scanner to start.
4. Press ENT to store the frequency. Use the ^ or v keys to step up and down from the stored frequency.
5. While automatic tuning, press ^ or v to change the direction of the tune. When the scanner finds an active
frequency, it stops on the frequency.
USING FREQUENCY COPY
You can easily copy a frequency into a vacant channel in a specified bank. This feature provides and easy
method of storing frequencies of interest you encounter while searching or tuning.
Note: You cannot copy a frequency from the Marine and FRS/GMRS/MURS search bands.
COPYING A FREQUENCY INTO A VACANT CHANNELS IN A SPECIFIED BANK
You can copy frequency into a vacant channel in a specified bank when the scanner stops on the frequency
during search or tune mode.
Note: If you try to copy a frequency that is already stored in the same bank, the scanner sounds the notice
tone 3 times after you press ENT. Dupl.Freq.Chxxx appears at the 3rd line. If you want to copy the duplicate
frequency anyway, press ENT, or if not, press ./CLEAR to cancel.
1. Press FUNC, and then ENT when you find a frequency you want to copy. Bank 9 (default setting) Store?