User's Manual

The priority feature lets you scan through channels and still not miss important or interesting calls on a
frequency you select. You can program one frequency into the priority channel. As the scanner scans, if the
priority feature is turned on, the scanner checks the priority channel for activity every 2 seconds.
1.Press and hold FUNC about 2 seconds. Function menu appears on the display.
2. Press 3 to select Program Priority Channel Data then press 1 to select Program Frequency. The cursor
blinks at the second line.
3. Use the number keys and ./CLEAR to enter the priority frequency (including the decimal point).
4. Press ENT to set the priority channel. If the entered frequency is incorrect, Invalid Freq. briefly appears in
the scanner's display.
To turn on the priority feature, press FUNC then press 1/PRI. P:OFF changes to P:ON. The scanner checks
the priority channel every 2 seconds and stays on the channel if there is activity. Pri. Channel and the
frequency appear whenever the scanner is set to the priority channel.
To turn off the priority feature, press FUNC then press 1/PRI. P:ON changes to P:OFF.
DELAY
Many agencies use a two-way radio system that has a period of several seconds between a query and a reply.
To avoid missing a reply, you can program a 2-second delay into any channel or frequency. When your
scanner stops on a channel or frequency with a programmed delay, D appears and the scanner continues to
monitor that frequency for 2 seconds after the transmission stops before resuming scanning or searching.
You can program a 2-second delay in any of these ways:
. If the scanner is scanning and stops on an active channel, quickly press FUNC then press 2/DLY before it
resumes scanning.
. If the desired channel is not selected, manually select the channel, press FUNC then press 2/DLY.
. If the scanner is searching, press FUNC then press 2/DLY. D appears and the scanner automatically adds a
2-second delay to every transmission it stops on in that band.
To turn off the 2-second delay in a channel or frequency, press FUNC then press 2/DLY while the scanner is
monitoring that channel or frequency. D disappears.