User's Manual

20-527 Owner’s Manual Draft
Page 22 of 60
Add illust
2. In the marine, CB, and FRS/GMRS/MURS bands, you can directly select a channel or search through
the band. When MAN appears at the right position of the third line, you can directly select a channel (refer
to “Band Charts” on Page XX). Press the desired channel number while MAN appears to select it. You can
also change the channels by pressing ^ or v.
3. Press FUNC then SEARCH while MAN appears. MAN changes to SRCH and now you can search
through the band. Press FUNC then SEARCH again to return to the previous mode.
4. Rotate SQUELCH clockwise and leave it set to a point just after the hissing sound stops. After 2
seconds (if the delay feature is on), the received frequency appears and the scanner starts searching.
5. When the scanner finds an active frequency, it stops searching.
Band Charts
Search bank: SR0 Marine band
Receive mode: FM
Channel Frequency (MHz) Channel Frequency (MHz)
01 156.0500 05 156.2500
06 156.3000 07 156.3500
08 156.4000 09 156.4500
10 156.5000 11 156.5500
12 156.6000 13 156.6500
14 156.7000 15 156.7500
16 156.8000 17 156.8500
18 156.9000 19 156.9500
20 157.0000 21 157.0500
161.6000
22 157.1000 23 157.1500
24 157.2000 25 157.2500
161.8000 161.8500
26 157.3000 27 157.3500
161.9000 161.9500
28 157.4000 63 156.1750
162.0000
64 156.2250 65 156.2750
160.8250
66 156.3250 67 156.3750