User's Manual

20-527 Owner’s Manual Draft
Page 33 of 60
Locked out! appears and the scanner does not search.
Reviewing Locked-Out Frequencies
To review the frequencies within a search bank that you locked out:
1. Press SEARCH to set search mode.
2. Press FUNC then L/OUT. The locked-out frequency and Lockout list appear. Press ^ or v to review the
list. The locked-out number and the total locked-out number also appears as L/O XX of YY. (The tenth of
thirty locked out number would appear as L/O 10 of 30). If the search bank has no locked-out
frequencies, Empty. Lockout list appears. Press FUNC then L/OUT again to cancel reviewing locked-out
frequencies.
Add illust
Clearing a Locked-Out Frequency
To clear a locked-out frequency, select that frequency (see “Reviewing Locked-Out Frequencies” on Page
XX), then press CL.
If all locked-out frequencies are cleared within a bank, Empty. Lockout list appears.
Clearing All Locked-Out Frequencies in a Search Bank
1. Press SEARCH.
2. Select the search bank in which you want to clear all locked-out frequencies.
3. Press FUNC then press L/OUT. Lockout list appears.
4. Press FUNC then 6. Clear entire list ? Press 1 to clear all, any other key aborts appears. Press 1 to
clear all locked-out frequencies. List cleared. appears for about 2 seconds. Press any key other than 1 to
cancel clear.
Note: If all frequencies in a bank you selected are locked out, you cannot clear all locked-out frequencies
in that bank at the same time.
Priority
In addition to the 1,000 programmable memory channels, the scanner has one priority channel.