Installation Guide

Page 2 of 4
www.generalspecialtiesmfg.com
208-265-5244
Fastening Hardware
Per each two panel mount:
15 – 5/8” X ¼” stainless steel bolts
15 – ¼” stainless steel flange nuts
2 for feet to rail bottom 2 for brace to rail
2 for feet to brace bottom 8 for two panels to rails
1 extra
NOTE: You will need to purchase whatever fasteners are appropriate for attaching
the mount to your particular roof or other mounting surface.
Shown below are 4 of the different adjustment angles for these mounts.