User Manual

ManualsBrandsGeneral Technologies Corp ManualsClamp MetersGTC CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter

AC/DC Current Clamp Meters

series

Main features

State of the art ergonomic design and styling for

enhanced handling and use.

Three models with wide measuring ranges:

1 mA to 100 A (CM100), 0.1 A to 600 A (CM600)

and 0.1 A to 1000 A (CM1000).

AC/DC current and voltage measurement.

Ultra-low current measurement capability (1 mA

for CM100) for current leak measurement and

troubleshooting.

Safely measures current without contact with

the wire or circuit.

Double insulation, IEC 1010, CAT II 600V

(CM100 and CM600), CAT II 1000 V (CM1000).

Continuous reading and data hold modes.

Auto zero button for easy and quick zeroing of

the measurement.

Quick response: <0.5 seconds.

Large LCD display with symbols.

Soft pouch for instrument protection

Auto power off.

1000

0.1 to 1000 Amperes AC/DC

100

1 mA to 100 Amperes AC/DC

600

0.1 to 600 Amperes AC/DC

Simple and easy to use

Using the rotary switch on the handle, select the

type of current: AC or DC.

Press the lever to open the clamp meter jaw and

insert the wire or cable into the opening.

Read the current measurement on the LCD display.

How it works

The CM series of clamp meters measure the electrical

current in wires, cables or electrical wiring systems by

detecting the magnetic field generated around them by

the flow of electricity.

These instruments are capable of measuring currents

without direct contact to the circuit for quick, safe and

accurate results.

Besides detecting and measuring current, current peaks

and parasitic draws, they also integrate voltage,

resistance and continuity measurement functions, to

cover a wide range of common electrical

measurements.

Summary of content (2 pages)

PAGE 1
CM1000 CM600 0.1 to 1000 Amperes AC/DC 0.1 to 600 Amperes AC/DC CM100 1 mA to 100 Amperes AC/DC series CM AC/DC Current Clamp Meters Simple and easy to use Using the rotary switch on the handle, select the type of current: AC or DC. Press the lever to open the clamp meter jaw and insert the wire or cable into the opening. Read the current measurement on the LCD display. How it works Main features State of the art ergonomic design and styling for enhanced handling and use.
PAGE 2
Model CM100 CM600 CM1000 DC Current AC Current DC Voltage AC Voltage Resistance Continuity test Display Autopolarity Zero adjustment Sample rate Peak hold function Over range indicator Power Auto power off Battery life 0.001 to 100 A. 0.1 to 600 A. 0.1 to 1000 A. 0.001 to 100 A. 0.1 to 600 A. 0.1 to 1000 A. 0.1 to 600 V. 0.1 to 600 V. 0.1 to 1000 V. 0.1 to 600 V. 0.1 to 600 V. 0.1 to 1000 V. 10 to 100 KOhm 0.1 to 1000 Ohm 10 to 100 KOhm Yes Yes Yes 4 digit LCD, 9999 counts with measurement units.