User Manual

Page5
4.3 ‘MODE’ button and menu
 The ‘MODE’button allows the selection of the type of measurement to be
showninthedisplay.Uponpressingthisbuttonapulldownmenuwillopenwith
thecurrentsettinghighlighted,Tochangethesettingpressthe‘MODE’button
repeatedlyuntilthedesiredsettingishighlighted,thenwaituntilthepulldown
menucloses.Thenewcurrentsettingwillbedisplayedasthemodeiconatthe
topofthescreen.
01607 RPM
-5
5
10
kv
-4 -2 0 2
ms
0
Burn Time
Dwell
Tachometer
Voltage
Fig.4-Measurementselectionmenu
Measuring/displayingsparkburn(ring)time.
Measuring/displayingdwellangleorramptime(automaticallyselected
dependingontheconnectedsensor).
Measuring/displayingRPM(tachometer).
Measuring/displayingsparkplugvoltages.
4.4 ‘VIEW’ button and menu
 The’VIEW’buttonisusedtoselecthowthechosenmeasurementwillbe
showninthedisplay.Uponpressingthisbuttonapulldownmenuwillopen
withthecurrentsettinghighlighted.Tochangethesettingpressthe‘VIEW’
buttonrepeatedlyuntilthedesiredsettingishighlighted,thenwaituntil
thepulldownmenucloses.Thenewsettingwillbedisplayedasthedisplay
iconatthetopofthescreen.