User Manual

Page6
01607 RPM
-10
10
20
kv
-4 -2 0 2
ms
0
Chart
Comparison
Digital
Waveform
Fig.5-Displaymodeselectionmenu
Chart(i.e.trendline)view.
Comparisonview.
Digitalandanaloggaugereadouts.
Waveform(i.e.oscilloscope)view.
4.5 ‘HOLD” button
· Whenchart,digitalorwaveformdisplaymodeisselected,pressingthe‘HOLD’
buttonwillpausethemeasurement,holdthecurrentdisplay,andtheword
“HOLD”willbeshowninthemeasurementareaofthedisplaytoindicatethis
status.Pressthe‘HOLD’buttonagaintoresumenormaloperation.
· Wheninthecomparisondisplaymode,thisbuttonisusedtoinitiateandstopa
measurement.Fordetailssee‘6.2Comparisonview’.
4.6 Tachometer reading
DigitalreadoutoftheengineRPM.
4.7 Battery level indicator
Thebatterylevelindicatorprovidesanapproximateindicationofthestateofchargeof
theinternalbattery,asfollows:
Full
Empty
NOTE: Theinstrumentwillturnautomaticallyoffifthebatteryvoltagefallsbelowthe
absoluteminimum.