User Manual

PC
USB
By Computer Setting
The meter can link with computer to
set the logging parameters which
are introduced in Page5~Page11.
1.Plug the standard accessory USB
cable into the USB port at the right
side of the meter.
2.Instert the USB connector to the
computer's Com.1 or 2 or ....8 etc.
3.Start to set up logger software by
inserting the CD-ROM.
4.When installing the logger software
,please review the manual enclosed
in the CD to understand the function
of the software.
5.It is needed to install the USB driver
which is enclosed in the software CD.
6.Running the software on computer.
7.Select the correct COM port and
make sure the meter is now linked
well to software.
While the logger
contacts well, the ID information of
the datalogger will appear on main
screen. If not,
message will appear on
screen.
<< WARNING: Data
Logger is not plug in interface
module!>>
USB1.0
12