Use and Care Guide

15
Setup Instructions
Setting the Date and Time
If you intend to record images, you should set the Date and Time when powering ‘ON’ the thermal
camera for the first time.
1
Make sure that the thermal camera is in Null mode (see p.14).
2
Press the MENU/ENTER button
to call up the Main Menu. Then
press the UP or DOWN key to
navigate to the System Setup
line. Press the MENU/ENTER
button to open the System
Setup menu.
3
Press the UP or DOWN arrow to select
the Date & Time line, then press the
MENU/ENTER button.
4
a) Use the UP and DOWN arrows to
select an item to change, and the LEFT
and RIGHT arrows to set a new value.
b) Repeat for each date and time
parameter.
c) Press the MENU/ENTER button to
save the change(s), or the ESC button
to return to the System Setup menu
without making any changes.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor