UV513AB-final-092608:Layout 1 9/26/08 4:51 PM Page 1 UV513AB USER’S MANUAL Digital UV AB Light Meter Thank you for purchasing this Digital UV AB Light Meter. Read through this instruction manual before operating the unit. Please also store and retain this instruction manual for future reference.
UV513AB-final-092608:Layout 1 9/26/08 4:51 PM Page 2 STORAGE FOR SENSOR The UV sensor is an extremely precise detection instrument. When not in use, store it in a dry environment. Please keep the manual for future reference. DANGER WHEN USING THE EQUIPMENT ATTENTION Improper use may endanger the health of third parties! It may also result in damage to the equipment or other material damage. FEATURES: The UV-Meter is a mobile, hand-held device for measuring UV irradiation.
UV513AB-final-092608:Layout 1 9/26/08 4:51 PM CONTROL PANEL 1. LCD Display 2. Memory button 3. Mode button 4. Power On/Off and Hold Button 5.
UV513AB-final-092608:Layout 1 9/26/08 OPERATIONS OF INSTRUMENT POWER ON Press button and hold for 2 seconds. Release the symbols of LCD will appear for 1 second. 4:51 PM Page 4 button after power on. All POWER OFF Press button and hold for 2 seconds. All symbols of LCD will appear and shut down after releasing button. MEASUREMENT VALUE The primary reading always displays the value of measuring. The secondary reading displays the outcomes of the advanced functions or data recording.
UV513AB-final-092608:Layout 1 9/26/08 4:51 PM Page 5 Data Review Press the M button during the hold mode, it will get into the data memory review mode. The LCD will show MEM symbol. Press the S button to review data 0 to 20. Data 0 is always at stored the interval time after auto recording activated. If the data are automatically recorded, the AUTO symbol appears next to MEM during the review. DATA STORE Normal Press the M button to store the current measurement displayed at Primary Display.
UV513AB-final-092608:Layout 1 9/26/08 4:51 PM Page 6
UV513AB-final-092608:Layout 1 9/26/08 4:51 PM Page 7 Note: It is recommended not to assemble and disassemble the wand too many times to avoid wearing out the screw holes.
UV513AB-final-092608:Layout 1 9/26/08 4:51 PM GENERAL TOOLS & INSTRUMENTS™ 80 White Street, New York, NY 10013-3567 PHONE (212) 431-6100 FAX (212) 431-6499 TOLL FREE (800) 697-8665 e-mail: sales@generaltools.com www.generaltools.com UV513AB User’s Manual Specifications subject to change without notice ©2008 GENERAL TOOLS & INSTRUMENTS™ NOTICE - WE ARE NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS.
