Instructions / Assembly

7. Take pliers away and check that the eyelet is set as you want it. (See photo 6)
[Photo 6: “Rough” side with installed eyelet]
8. If the eyelet can be rotated in the material you will need to repeat the previous
step with a bit more force until it holds the material tightly.
[Photo 7: “Finished” side of eyelets shows on “Smooth” side of work material.
It’s that easy!
“Precision, Specialty and Innovation…Since 1922”
General Tools & Instruments Co., LLC ● 80 White Street ● New York, NY 10013-3567
Tel: [phone] ● Fax: [phone] ● www.generaltools.com