Full Product Manual

the menu is your own response speed. If no selection is made within 2-1/2 minutes
following entry into Menu mode, the console will automatically revert to Preview mode.
The same time constraint applies to selections within submenus. If you do not respond
to a prompt (indicated by a flashing word or line of text) within 2-1/2 minutes, the
console will switch back to Preview mode—its default operating state.
To access the main menu, press the OK/Menu button to enter
Menu mode. Doing so brings up the screen shown at right.
To navigate the main menu, use the ▲ and ▼ buttons to move
up and down until the parameter you wish to change is
highlighted and flashing in green. Then press the OK/Menu
button to select it and call up its submenu.
The DELETE ALL FILES line gives you two options (yes and no)
that can be selected using the ▲ and ▼ buttons. The sequence is similar to the
previously described procedure for deleting an individual photo or video.
The AV OUTPUT line allows you to send live video, or saved video clips and photos, out
through the unit’s A/V out jack to an NTSC or PAL TV monitor. Before selecting this
option, make the physical connection described in the “Viewing Live Video on a TV
Monitor” section. Once you have connected to an external display, the console’s LCD will
go black and remain that way until you unplug the A/V cable from the console's A/V Out
jack. If you attempt to activate A/V output mode without having plugged in an A/V cable,
the LCD will display the following advisory: NO AVOUT CABLE.
The DATE/TIME SETUP line allows you to set the console's calendar and clock. Doing so
is necessary only if you wish to keep track of your photo and video files by date and time.
When DATE/TIME SETUP is selected, the first screen to appear will have the year
highlighted in orange. To decrease the value, press the button. To increase the value,
press the button. Once you have set the year, save the setting and advance to the
next field—the month—by pressing the ▼ button. Set the month as you did the year, by
using the and buttons to increase or decrease the value by one unit per button
press, and pressing the ▼ button to save the change (if any) and move on to the next
field. Repeat this process until all six date and time components have been set. To back
up from any field to the previous field, press the ▲ button.
The DISPLAY line below the date and time fields allows you to choose whether or not to
superimpose the date and time on the display in Preview mode. To always superimpose
the date and time, press the button until YES appears at the right of DISPLAY. To
never superimpose the date and time, use the same button to select NO. To save your
selection, press the OK/Menu button. Finally, press the OK/Menu button again to save
all of your settings.
The LANGUAGE line of the main menu allows you to view the main menu, as well as the
DELETE screens for individual photos and videos, in any of 28 languages (see the
Specifications section on page 16 for the full list). Use the ▲ and ▼ buttons to navigate
to the language you wish to use and then press the OK/Menu button to save your
selection.
The TV SYSTEM line enables you to choose either NTSC or PAL formatting of the videos
you export to a TV monitor. Press either the ▲ and ▼ button to make your choice and
then push the OK/Menu button to save the setting.
15
DELETE ALL FILES
A
V OUTPUT
D
ATE/TIME
LANGUAGE
TV SYSTEM
A
UTO POWER OFF
MAIN MENU