RUGGED SUPER HIGH-PERFORMANCE VGA RECORDING VIDEO BORESCOPE SYSTEM WITH 7-INCH LCD USER’S MANUAL GENERAL TOOLS & INSTRUMENTS 80 White Street New York, NY 10013-3567 PHONE (212) 431-6100 FAX (212) 431-6499 TOLL FREE (800) 697-8665 e-mail: sales@generaltools.com www.generaltools.com DCS2000 User’s Manual DCS2000 Specifications subject to change without notice ©2013 GENERAL TOOLS & INSTRUMENTS NOTICE - WE ARE NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS.
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 – 3 Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 OPERATING, MAINTENANCE & TROUBLESHOOTING TIPS . • The probe contains thin wires running along its entire length. Accordingly, never insert or bend it by force, and never over-bend any part of the probe. Specifically (see figure below right): 앩 Do not bend the probe more than 90° anywhere along its length. 앩 Do not bend it more than 70° within 1 to 2 inches (25 to 50mm) of its camera tip. 앩 Do not bundle the probe into a tight circle to store it.
• A pre-installed rechargeable Lithium-polymer battery • An AC adaptor/battery charger • A custom airtight hard plastic carrying case • This user’s manual The LANGUAGE submenu Options English, French, German, Italian, Spanish, Portuguese, Japanese, Traditional Chinese, Simplified Chinese, Danish, Dutch, Polish, Russian, Bulgarian, Turkish, Swedish, Finnish, Norwegian, Estonian, Lithuanian, Latvian, Hungarian, Czech, Slovak, Slovenian, Romanian, Greek PRODUCT OVERVIEW Fig.
The DATE/TIME submenu Options Instructions Current date The term highlighted in green can be increased or decreased by one unit by each press of the and Current time buttons, respectively. After changing a setting (or leaving it unchanged), press the button to Date format advance to the next field or the button to return to the previous field.
SETUP INSTRUCTIONS CHARGE BATTERY 1. Locate the white box containing the AC adaptor/battery charger and open it. 2. Plug the prongs of the adaptor into an 110VAC power outlet. 3. Lift up the small rubber flap labeled on the bottom right side of the console. Insert the plug at the end of the adaptor’s cable into the unlabeled DC IN jack under the flap (see Fig. 1). The Battery Status LED at the bottom left of the front panel will glow red and remain red until the plug is removed.
In Playback mode, pressing the button repeatedly recalls all photos and videos from memory in the reverse order in which they were stored (in other words, from newest through oldest). By contrast, pressing the button repeatedly recalls all stored photos and videos from memory in the same order in which they were stored (from oldest through newest).
Fig. 2 shows the controls and key structures of the P16181HP. Familiarize yourself with their positions and functions before using the probe. Fig. 2. The controls and key structures of the P16181HP 1. Probe 2. Stainless steel camera head containing four forward-facing LEDs and two side-facing LEDs 3. Stainless steel accessory alignment ring 4. Black metal thread protector ring 5. Rubber protective cap 6. Probe handle 7. Light boost button 8. 90° rotation button 9. Anti-reflection button 10.
