Project Ideas

47
General Tools & Instruments
CAP1500
MSV350D
Indicates optional NIST calibration is available
FEATURES:
• Wide measurement range
• Uses precision dual slope A/D converter
• Alligator clip leads for in-circuit testing
• Zero adjust switch and low battery indicator
• 3-1/2-digit (1999 count) LCD
• Fuse-protected from overloads
SPECIFICATIONS:
♦ Measurement Range: 0 to 20mF over 9 ranges
(0 to 200pF/2000pF/20nF/200nF/2µF/20µF/
200µF/2000µF/20mF)
♦ Measurement Accuracy:
±(0.5% + 1 digit) or better below 20µF;
±(5% +5 digits) or better above 20µF
♦ Sampling Time: 0.4 seconds
♦ Operating Temperature: 32° to 122°F
(0° to 50°C) @ <75%RH
♦ Dimensions: 5.3 x 2.8 x 1.4 in.
(135 x 71 x 36mm)
♦ Weight: 7.1 oz. (201g)
♦ Power Source: 1 “9V” battery (included)
INCLUDES:
• Alligator Clip Test Leads
• Soft Case
• Battery
• User’s Manual
• 1-Year Limited Warranty
UPC NO.
50192 4 CAP1500
AUTOMATIC DIGITAL CAPACITOR TESTER – CAP1500
FEATURES:
• Uses LCD scanning indicators and buzzer to
indicate direction and position of stud, batten,
metal object or wiring
• Detects/distinguishes between metal
pipes/tubes and hot wires with variable
sensitivity
• Also distinguishes between battens and studs
• Simultaneously detects studs and metal/wiring
• Needs no probe
• Battery charge indicator
• Auto power off
UPC NO.
012175 8 MSV350D
SPECIFICATIONS:
♦ Dimensions:
6.1 x 2.6 x 1.3 in.
(155 x 65 x 32mm)
♦ Weight: 6.5 oz. (185g)
♦ Power Source:
1 “9V” battery
(not included)
♦ Warranty: 1-year
(limited)
INCLUDES:
• User’s Manual
• 1-Year Limited Warranty
DIGITAL 3-IN-1 LCD STUD/VOLTAGE/METAL DETECTOR – MSV350D
Ideal for locating studs, pipes, wires carrying voltage and hidden metal.
ST600LED
FEATURES:
• Detects faulty wiring in 3-wire receptacles
(CT300)
• Detects faulty wiring in 3-wire receptacles with
ground fault circuit interrupters (GF1302)
• Different combinations of three lights indicate
six different fault types
• Designed for 120VAC circuits
• UL listed
• 1-Year Limited Warranty
UPC NO.
01359 5 CT300
51067 4 GF1302
3 WIRE CIRCUIT ANALYZER – CT300
3 WIRE RECEPTACLE TESTER WITH GFCI – GF1302
Ideal for checking wall outlets.
GF1302
CT300
FEATURES:
• Bright red LED indicates hot side and continuity
• Continuity and polarity checks
• Microwave leakage test
• Checks fuses and bulbs
• Drop-resistant to 10 ft.
• 1-Year limited warranty
SPECIFICATIONS:
♦
AC Voltage Test Range: 70 to 250V (contact
method); 70 to 600V (non-contact method)
♦
DC Voltage Test Range: 0 to 250V
♦
Continuity Test Range: 0 to 50MΩ
♦
Polarity Test Range: 1.5 to 36VDC
♦
Microwave Leakage Test: >5mW/cm
2
♦
Power Source: 1 “LR44” battery (included)
UPC NO.
51115 2 ST600LED
BRIGHT RED LED SCREWDRIVER/CONTINUITY TESTER – ST600LED
Ideal for checking for continuity and voltage.
ELECTRICAL
Electrical Testers