Instructions / Assembly

1
Installation Instructions for
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the fixture screws.
Install the lamp by completely inserting the lamp pins into the socket. Refer to the label on the socket for max wattage
information.
Install the shade by carefully placing it over the socket and onto the shade base.
1
2
3
1A
4
5
Apollo 1 Light Wall
1.0
EW1031
EW1031
Wall
JUNCTION BOX
MOUNTING
PLATE
4
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
6
FIXTURE SCREW
SHADE
3
LAMP
SOCKET
7
7
6
5
5
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer
for additional information.
This instruction shows a typical installation.