Manualshelf

Instructions / Assembly

ManualsBrandsGeneration Lighting ManualsLighting4-Light Brushed Nickel Track Lighting Kit with Satin White Glass
1234
2
1A
Install the Fixture
FIXTURE BASE
CAP NUT
ELECTRICAL BOX
MOUNTING PLATE
MOUNTING PLATE STUD
Secure the mounting plate to the electrical box with two mounting plate screws.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Align then place the fixture base onto the mounting plate studs and secure it with the cap nuts.
Place the shade over the socket and secure it in place by installing and tightly screwing the shade collar nut onto the
socket; repeat for remaining shades. CAUTION: Do not over tighten, the glass may break resulting in injury.
Screw the lamps into the sockets.
Determine the wanted direction of the light and set direction by swinging the arms to the respective direction.
1
2
3
4
5
6
7
8
Use 120 voltMAX 60 Watt
Type A19 Medium Base Lamp.
SHADE
1
LAMP
SOCKET
SHADE COLLAR NUT
MOUNTING PLATE SCREW
5
7
6
ARM
8