Installation Guide

2
1A
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure by installing the set screws using an Allen wrench.
Screw the lamp(s) into the socket(s). Refer to the label on the socket for Max Wattage information.
If applicable, install the diffuser by pushing it into the fixture until it snaps in place.
For wet locations, caulk around the base of the fixture with waterproof construction sealant.
1
2
3
4
5
6
7
JUNCTION BOX
NEUTRAL WIRE
HOT WIRE
WHITE WIRE
BLACK WIRE
FIXTURE BASE
LAMP
FIXTURE
Install the Fixture
MOUNTING
PLATE
3
5
4
SET SCREW
DIFFUSER
1
1
1
7
LAMP
ALLEN WRENCH
6
6
8
8