Installation Sheet

1
Installation Instructions for
Temporarily install the mounting plate to the junction box.
Mark the anchor holes locations through the holes on the mounting plate. Remove the mounting plate.
Drill appropriate sized holes at the marked locations and install the anchors.
Secure the mounting plate to the junction box and screw the anchor screws into the anchors.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Properly place all wires and wire nut connections into the junction box/fixture base, mount the fixture onto the mounting plate,
and secure it in place using the fixture screws.
Install the candle tube by sliding it over the socket.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
Install the shade by sliding it through the bracket and into the shade base.
1
2
3
4
5
Demi Wall
1.0
AW1041
AW1041
6
1A
7
Wall
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer
for additional information.
8
9
JUNCTION BOX
MOUNTING PLATE
6
7
SHADE
FIXTURE SCREW
10
LAMP
CANDLE TUBE
SOCKET
9
8
ANCHOR
ANCHOR
SCREW
BRACKET
10
11
11
8
3 4
3 4
SHADE BASE