Instructions / Assembly

1.0

CV1021

CV1021, CV1022, CV1023, CV1024

Installation Instructions for

Geneva Wall

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing NEC compliant junction

boxes.

This product is safety listed for damp locations.

This instruction shows a typical installation.

WALL

SAVE THESE INSTRUCTIONS!

CAUTION RISK OF FIRE-

This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and

operation of the product and the hazards involved.

Use minimum 90°c supply conductors.

Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.

7400 Linder Ave., Skokie, IL 60077

T 847.410.4400 | F 847.410.4500

www.generationlighting.com

PAGE 1
Installation Instructions for CV1021 Geneva Wall CV1021, CV1022, CV1023, CV1024 1.0 WALL GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors.
PAGE 2
Install the Fixture 1A SHADE TOOL COLLAR NUT 3 4 LONG SHADE LAMP MOUNTING PLATE JUNCTION BOX 6 7 2 8 SHADE SCREW (Only for Models with Short Shade) SHORT SHADE 8 2 FINIAL (Only for Models with Short Shade) 1 Secure the mounting plate to the junction box. 2 For Models with Short Shade: Use shade screws and finial to secure short shade. Repeat for remaining short shades. 3 Screw the lamp(s) into the socket(s). Refer to the label on the socket for Max Wattage Information.