Installation Sheet

1
Installation Instructions for
Thayer 4, 5 and 8 Light Chandelier
1.0
F3322-4-F3323-5-F3324-8
Chandelier
F3322/4, F3323/5, F3324/8
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer
for additional information.
This instruction shows a typical installation.
Feed the cord through the stem and screw the stem onto the fixture.
Install the candle tubes by slipping them over the sockets.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Insert the frame rods into the lower frame and screw the cap screws onto the rods.
Slide the frame arms over the frame rods until they seat into the frame base.
insert the upper end of the frame rods into the top frame and screw the cap screws onto the rods.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
.
1
2
1A
3
5
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
4
STEM
5
6
LAMP
4
CANDLE TUBE
SOCKET
CAP SCREW
2
3
UPPER FRAME
7
1
6
7
CAP SCREW
LOWER FRAME
FRAME ARM