Installation Sheet

Installation Instructions for

Franklin Floor Lamp

1.0

KT1301

IMPORTANT SAFETY INSTRUCTIONS

This portable lamp has a polarized plug (one blade is wider

than the other) as a safety feature to reduce the risk of

electric shock.This plug will fit in a polarized outlet only

one way. If the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit contact a qualified electrician.

Never use with an extension cord unless plug can be fully

inserted. Do not attempt to defeat this safety feature.

K 1301T

PORTABLE

General Product Information:

This product is safety listed for dry locations only.

This instruction shows a typical installation.

SAVE THESE INSTRUCTIONS!

Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.

7400 Linder Ave., Skokie, IL 60077

T 847.410.4400 | F 847.410.4500

www.generationlighting.com

PAGE 1
Installation Instructions for KT1301 Franklin Floor Lamp KT1301 1.0 PORTABLE General Product Information: This product is safety listed for dry locations only. This instruction shows a typical installation. SAVE THESE INSTRUCTIONS! IMPORTANT SAFETY INSTRUCTIONS This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock.This plug will fit in a polarized outlet only one way.
PAGE 2
Assemble the Lamp 1A SOCKET SHADE 2 YOKE LAMP 4 3 ADJUSTMENT KNOB STEM 4 ADJUSTMENT KNOB BASE 1 1 Screw the base onto the stem. 2 Place the shade on the socket and secure it in place by screwing the collar nut onto the socket. 3 Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information. 4 Adjust the Height: Loosen the 2 height adjustment knobs, raise or lower to desired height, and re-tighten the adjustment knobs to secure in place.