Installation Guide

1
Installation Instructions for
Hazel Floor & Table Lamp
1.0
LT1001
Portable
GP I :ENERAL RODUCT NFORMATION
This product is safety listed for dry locations only.
This instruction shows a typical installation.
1A
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider
than the other) as a safety feature to reduce the risk of
electric shock.This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit contact a qualified electrician.
Never use with an extension cord unless plug can be fully
inserted. Do not attempt to defeat this safety feature.
1
Install the glass to the bracket, letting the socket loose over the glass, and secure the glass in place by using the knurled cap
screws, rubber washers and ball cap nut as shown. Insert the socket into the glass and secure it in place by screwing the collar nut
on the socket.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Adjust the Height (Model LT1011 Only): Twist the lock on the lamp and adjust the height as necessary.
LT1001, LT1011
SHADE
CAP NUT
RUBBER WASHERS
CAP SCREW
COLLAR NUT
LAMP
2
3
LOCK
BRACKET
SOCKET
1
2
1
3