Instructions / Assembly

Largo Pendant

Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.

7400 Linder Ave., Skokie, IL 60077

T 847.410.4400 | F 847.410.4500

www.generationlighting.com

LARGO_PEND

TP1161

1.0

Installation Instructions for

PENDANT

CAUTION RISK OF FIRE-

This product must be installed in accordance with the

applicable installation code by a person familiar with

the construction and operation of the product and the

hazards involved.

Use minimum 90°C supply conductors.

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing NEC

compliant junction boxes.

This product is safety listed for damp locations.

Incandescent version may be dimmed with a standard

incandescent dimmer. LED version may be dimmed with a LED

dimmer. Consult lamp manufacturer for additional information.

This instruction shows a typical installation.

SAVE THESE INSTRUCTIONS!

PAGE 1
Installation Instructions for LARGO_PEND TP1161 1.0 Largo Pendant PENDANT GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. Incandescent version may be dimmed with a standard incandescent dimmer. LED version may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information.
PAGE 2
Install the Fixture 1A JUNCTION BOX 7 6 5 MOUNTING PLATE 8 8 FIXTURE SCREW CANOPY 2 STEM 3 SOCKET ASSEMBLY 9 COLLAR NUT SHADE LAMP 10 1 Secure the mounting plate to the junction box. 2 Determine the wanted height or look of the fixture with the decorative stems, then assemble them by screwing them together. 3 Feed the fixture wires through the stem assembly, then screw the stem assembly on to the top of the socket assembly. 4 Weave the cord through the canopy and out of the junction box.