Instructions / Assembly

1A
2
Secure the mounting plate to the junction box.
Determine the wanted height or look of the fixture with the decorative stems, then assemble them by screwing them together.
Feed the fixture wires through the stem assembly, then screw the stem assembly on to the top of the socket assembly.
Weave the cord through the canopy and out of the junction box. Trim the cord leaving enough to make electrical connections.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the canopy onto the mounting plate, and secure in place using the fixture screws.it
Place the shade over the socket and ut onto the socket.secure it in place by screwing the collar n
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage Information.
MOUNTING PLATE
FIXTURE SCREW
STEM
CANOPY
SOCKET ASSEMBLY
COLLAR NUT
SHADE
LAMP
JUNCTION BOX
Install the Fixture
1
2
3
4
5
6
7
8
9
10
10
9
88
5
6
7
2
3