Installation Sheet

Installation Instructions for

LAMP

JUNCTION BOX

MOUNTING PLATE

SOCKET

SHADE

FIXTURE

SCREW

Mercer 1, 2, 3, and 4 Light Vanity Strip

1.0

V 24301-V 24302-V 24303-V 24304SSSS

V 24301,V 24302,SS

V 24303,V 24304SS

COLLAR NUT

Secure the mounting plate to the junction box.

Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.

Connect the white fixture wire to the neutral power line wire with a wire nut.

Connect the black fixture wire to the hot power line wire with a wire nut.

Mount the fixture base onto the mounting plate and secure it with the fixture screws.

Place the shade over the socket and secure it in place by screwing the collar nut onto the socket. Repeat for multiple

shades.

Screw the lamp(s) into the socket(s). Refer to the label on the lamp socket for Max Wattage information.

WALL

SAVE THESE INSTRUCTIONS!

CAUTION RISK OF FIRE-

This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and

operation of the product and the hazards involved.

Use minimum 90°c supply conductors.

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliant junctionNEC

boxes.

This product is safety listed for damp locations.

Incandescent version may be dimmed with a standard incandescent dimmer.

LED LEDversion may be dimmed with a dimmer. Consult lamp manufacturer

for additional information.

This instruction shows a typical installation.

Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.

7400 Linder Ave., Skokie, IL 60077

T 847.410.4400 | F 847.410.4500

www.generationlighting.com