Use and Care Manual

English
10" Drill Press
Operator’s Manual GDP1012A
6
• Before starting, be sure chuck key is removed from the chuck and the motor head and
table are locked.
•
Never start the drill press when the bit or other cutting tool is in contact with the work piece.
•
Adjust the table or depth stop to avoid drilling into the table.
•
When using a drill press vise, always fasten the vise to the table.
•
Do not operate in rain or in damp locations.
• Grounding required.
SAVE THESE INSTRUCTIONS
KNOWING YOUR 10" DRILL PRESS
1
11
9
21
10
8
4
5
18
3
6
12
2
13
FIG 1
15 141716
7
20
19
1. Pulley Housing Cover
2. Motor
3. ON/OFF Switch
4. Chuck
5. Spindle
6. Crank Handle
7. Table Support Lock Handle
8. Table
9. Table Support
10. Column
11. Column Support
12. Feed Handle
13. Tension Lock Screw
14. Motor Pulley
15. Spindle Pulley
16. Middle Pulley
17. Belt
18. Depth Scale
19. Bevel Scale
20. Feed Return Spring and Cover
21. Base