Use and Care Manual
5
English
Guidelines for Using Extension Cords
SPECIFIC SAFETY RULES FOR JIG SAWS
WARNING:DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT
SAFETY RULES. If you use this tool unsafe or incorrectly, you can suffer serious
personal injury!
•
Hold the tool by insulated gripping surfaces
•Avoidcuttingnails,
•Donotcuthollowpipe.
•Checkfortheproperclearance
•MakesurethebladeisNOTcontactingtheworkpiece
•Donotleavethetoolrunning.
•Donottouchthebladeortheworkpieceimmediatelyafteroperation.
•Alwaysswitchoffandwaitforthebladetocometoacompletestop
•Keephandsawayfromthemovingparts.
•Somematerialcontainschemicalswhichmaybetoxic.
• Alwaysholdthetoolrmlyinyourhands
• Weareyeandhearingprotection.
• Protectyourlungs.
WARNING: Read and understand all warnings, cautions and operating
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate
Amperes
(At Full Load)
Extension Cord Length
25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 200 Feet
0–2.0
2.1–3.4
3.5–5.0
5.1–7.0
7.1–12.0
12.1–16.0
16.1–20.0