Use and Care Manual

ManualsBrandsGenesis ManualsJig Saws5.0 Amp Variable Speed Jig Saw

English

Variable-Speed Orbital-Action Jig Saw

Operator’s Manual GJS500

VACUUM ADAPTOR INSTALLATION (FIG 3)















OPERATION

SWITCH ACTION

WARNING: Always be sure that the tool is switched off and unplugged before

adjusting or checking function on the tool. The switch can be locked in the “ON” position

for ease of operator comfort during extended use. Use caution when locking tool in the

“ON” position and maintain a ﬁrm grasp on the tool.





To Start the Saw, 





To Stop the Saw, 



SPEED ADJUSTMENT DIAL



































Workpiece being cut Adjusting dial number

  

  

  

  

  

SELECTING THE ORBITAL CUTTING ACTION









FIG 3