Use and Care Manual
English
8V Lithium-ion Screwdriver
Operator’s Manual GLSD08B
• Turn the power tool off, and disconnect the plug
.
.
•
Store idle tool out of reach of children and other inexperienced persons.
•
Maintain power tools with care.
•
Use recommended accessories.
•
Keep cutting tools sharp and clean.
.
•
Feed the workpiece in the correct direction and speed.
•
Never leave the tool running unattended, turn the power off.
BATTERY TOOL USE AND CARE
Ensure the switch trigger is in the off position before inserting battery pack.
Recharge only with the charger specified by the manufacturer.
Use battery tools only with specified battery packs
Avoid storing the battery pack in a container with other metal objects such
as nails, coins, clips, keys, screws, or other small metal objects that can
make a connection from one terminal to another
Under abusive conditions, liquid may be ejected from the batter
Battery tools do not need to be plugged into an electrical outlet
WARNING:USE OF THIS TOOL CAN GENERATE AND DISBURSE DUST OR
OTHER AIRBORNE PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE SILICA DUST
AND ASBESTOS. Direct particles away from face and body. Always operate tool in a well-
ventilated area and provide for proper dust removal. Use dust collection system wherever
possible. Exposure to the dust may cause serious and permanent respiratory or other
injury, including silicosis (a serious lung disease), cancer, and death. Avoid breathing
the dust, and avoid prolonged contact with the dust. Allowing dust to get into your
mouth or eyes, or lay on your skin may promote absorption of harmful material. Always
use properly fitting NIOSH/OSHA approved respiratory protection appropriate for dust
exposure, and wash exposed areas with soap and water.
SERVICE
• Haveyourpowertoolservicedbyaqualiedrepairperson
• Serviceyourpowertoolperiodically.
4