User's Manual

GR-2000 Basic Operation 01-12-20
5 of 8
7) Beep tone
To activate or disable the beep tone
- Press the Function[F] button until [bP on or oF] and the BELL[ ] icon blink on the LCD.
- Press the up[ ] button or down [ ] button.
- Press the PTT button or Function[F] button to confirm.
8) Roger tone
This feature will give the tone signal to other parties when transmitting finished (when PTT
button is released.)
To activate or disable the Roger tone
- Press the Function[F] button until [rb on or oF] and the Roger [ ] icon blink on the LCD.
- Press the up[ ] button or down [ ] button.
- Press the PTT button or Function [F] to confirm.
9) Setting the Ringer
This feature provides 3 user selectable call ringer signal and vibration.
To set your favorite call ringer signal.
- Press the Function[F] button until the [ CA 1 or up to 3 ] appears on the LCD.
- Press the up[ ] button or down [ ] button to select the call melody type.
- Press the PTT button to confirm.
- To activate the call , click the "PTT" button twice quickly.
10) Setting the Vibration Modes
To set for Vibration
- Press the Function[F] button until the [ Ub on or oF ] and Vibrator[ ] icon blink on the LCD
- Press the up[ ] button or down [ ] button.
- Press the PTT button or Function [F] to confirm.
11) Transmitting
- Press and hold the PTT button (The “TX” LED will light with red color).
- Speak slowly and clearly
- To stop the transmission, release the PTT button