User's Manual

If Low battery condition is detected, Radio flash LED with beep
sound. In this condition RX/TX is inhibited but one time of TX is
allowed.
2) TX low battery
If Low battery condition is detected while TX is active, Radio
allows TX
but it will be inhibited right after end of TX. There is still one-time
TX chance in the low battery condition.
7. Scramble Function
Four different kind of scramble can be selected to each channel.
If the same scramble is set on the same channel for each other,
Normal conversation will be possible.
8.PC Link
Turn radio on while pressing monitor and scan button at the same time.
Radio flash LEC in orange
To be out of PC link condition, Turn radio Off and the On.
9.Clone function
1) This function gives two radios same data with clone cable.
2) To set master radio which transmit data, Turn radio on while pressing
PTT
and Monitor button at the same time, LED will be On in Red
3) To set slave radio which receive data from Master radio.
Turn radio on while pressing PTT and Scan button at the same
time.
LED will be On in Green.
4) Once Master and slave radio is set, Please press PTT of Master
radio to
transmit data.