User's Guide

Get Started

3. Plug in

4. Remove the Limit Bar

• Ensure there is a space of more than 1.2m/4ft at the

front, and more than 0.5m/1.6ft on both sides of the

dustbin

Plug the power cord into the wall. Wrap the cord back so it

won't get in the way of the robot as it comes and goes. Put the

robot on the flat indoor ground, and remove the protection

device of limit bar at both ends of the front bumper.

Put the robot on the flat indoor ground, and remove the

protection device of limit bar at both ends of the front

bumper.

Note: Do not place the charging station under direct

sunlight.

Remove

1.2m(3.9 )