- GENICOM Intelliprint Laser Printer User Guide

Publication No. GEG-99141 Genicom Apr 02
D-2 GENICOM Intelliprint cL160 User Guide
About this Appendix
This appendix lists some of the most frequently-used commands of the Print Server command set.
More information about the command set, including additional options, can be found in the
Ethernet Network Interface Manual on the Electronic Library CD-ROM.
Please note the following before continuing:
• In this command set appendix the NIC is referred to as the Server.
• Commands are divided into Server (general), Port, and Protocol sections. Within each sec-
tion, commands are listed alphabetically.
• Commands may require privileged user status. Enter
Set Privileged, then enter the privi-
leged password when prompted.
• When you enter a Define or Purge command, you must reboot the Server for the command
to take effect.
• When the abbreviated syntax “
{EN|DIS}” is shown, you must choose either Enabled or Dis-
abled to complete the command.
Each section lists additional information needed to use the command table in that section.