- GENICOM LLC User Guide printer LN45, mL450
Table Of Contents
- How This Manual is Organized
- Preface
- Unpacking and Installing Your Printer
- About this Chapter
- Installation Precautions
- Unpacking the Printer
- Installing the EP Cartridge
- Adding paper to the 500-sheet universal paper cassette
- Connecting the Parallel Cable
- Connecting the Ethernet Cable
- Connecting the Power Cord
- Turning the Printer On
- Selecting a Display Language
- Installing Printer Drivers
- Printing a Configuration Summary
- Printing a Test Page
- Printing PCL and PostScript Font Lists
- Turning the Printer Off
- Printer and Options Parts and Functions
- Understanding Paper, Paper Paths, Paper Delivery and Paper Loading
- About this Chapter
- Paper
- Paper Size Requirements
- Media Sizes Supported
- Media Types supported
- Paper Orientation
- Long and Short Edge Duplex Binding in Portrait and Landscape Orientations
- Paper Paths
- Paper Delivery
- Adding paper to the 500-sheet paper cassette, Tray 1 or Tray 2
- Adding paper to the multi bypass feeder
- Adding paper to the HCF unit (2500-sheet)
- Loading envelopes into the envelope feeder
- Understanding and Navigating the Control Panel Menus
- Printer Consumables, Cleaning and Maintenance
- Troubleshooting
- About this Chapter
- Solving Printer Power-on Problems
- Solving Print Quality Problems
- Clearing Paper Jams
- Clearing Paper Jams from Area A
- Clearing Paper Jams from Area B
- Clearing Paper Jams from Area C
- Clearing Paper Jams from Area E
- Clearing Paper Jams from Area F
- Clearing Paper Jams from Area H
- Clearing Paper Jams from Tray 1
- Clearing Paper Jams from Tray 2
- Clearing Paper Jams from Trays 3, 4 and 5 in the HCF unit
- Clearing Paper Jams from the Multi-Bypass Feeder (MBF)
- Clearing Paper Jams from the Envelope Feeder
- Control Panel LCD Messages
- Ethernet Network Interface Troubleshooting
- Using DRAM DIMMs, FLASH DIMMs and Power-on Files
- General Information
- Safety Notes and Regulatory Compliances
- Printing Font Summaries
- Frequently Used Ethernet Commands
- GENICOM Customer Support and Part Numbers
Aug 01 Genicom Publication No. GEG-99126
GENICOM LN45 and Intelliprint mL450 User Guide 6-21
Code Class 4
Code Class 4
LCD MESSAGE
(LINE 1)
LCD MESSAGE
(LINE 2)
CAUSE OF
ERROR MESSAGE
REQUIRED
ACTION
4-0 FEED ERROR AREA C/TRAY 4 Tray 4 paper misfeed Clear paper misfeed
from Tray 4 or Area C
4-1 FEED ERROR AREA C/AREA B Tray 4 paper misfeed Clear paper misfeed
from Tray 4, Area C or
Area B
4-1 FUSER ERROR CALL SERVICE Fuser temperature
setting out of control
(On Time Fail)
Service Call required
4-1 IRREG. PAPER CHECK TRAY 1 Irregular paper in Tray
1 (see note 1)
Ensure the correct
paper is loaded in Tray
1
4-1 PAPER JAM CLEAR AREA A Paper jam in Area A Clear Paper Jam in
Area A
4-2 FEED ERROR AREA C/AREA B Tray 4 paper misfeed Clear paper misfeed
from Tray 4, Area C or
Area B
4-2 FUSER ERROR CALL SERVICE Fuser overheat trouble
detected
Service Call required
4-2 IRREG. PAPER CHECK TRAY 2 Irregular paper in Tray
2 (see note 1)
Ensure the correct
paper is loaded in Tray
2
4-2 PAPER JAM CLEAR AREA A Paper jam in Area A Clear Paper Jam in
Area A
4-3 FEED ERROR CLEAR AREA B Tray 4 paper misfeed Clear paper misfeed
from Tray 4 or Area B
4-3 FUSER ERROR CALL SERVICE Outboard Fuser
temperature cannot be
monitored
Service Call required
4-3 IRREG. PAPER CHECK TRAY 3 Irregular paper in Tray
3 (see note 1)
Ensure the correct
paper is loaded in Tray
3
4-3 PAPER JAM CLEAR AREA A Paper jam in Area A Clear Paper Jam in
Area A
4-4 FUSER ERROR CALL SERVICE Inboard Fuser
temperature cannot be
monitored
Service Call required
4-4 IRREG. PAPER CHECK TRAY 4 Irregular paper in Tray
4 (see note 1)
Ensure the correct
paper is loaded in Tray
4